Hazard Identification & Risk Assessment
Identifying hazards before they cause harm is a fundamental responsibility on any construction site. This section covers the hierarchy of risk controls (elimination, substitution, engineering, administrative, PPE), risk assessment matrices, Safe Work Method Statements (SWMS), hazard reporting procedures, and how to conduct a site-specific risk assessment.
Study Guide: Hazard Identification & Risk Assessment
Review these sample questions before starting the practice test.
Q1: What is a hazard in a workplace context?
- A. An incident that has already occurred
- B. A type of safety sign
- C. Anything with the potential to cause harm β
- D. A construction permit
A hazard is anything that has the potential to cause harm, including substances, equipment, work methods, or conditions in the work environment.
Q2: What is the first step in the risk management process?
- A. Implement controls
- B. Monitor and review
- C. Consult insurance providers
- D. Identify hazards β
The risk management process starts with identifying hazards, then assessing the risk, implementing controls, and monitoring and reviewing the effectiveness of controls.
Q3: What does the hierarchy of controls prioritise as the most effective control?
- A. PPE
- B. Elimination of the hazard β
- C. Administrative controls
- D. Substitution
The hierarchy of controls ranks elimination as the most effective measure, followed by substitution, isolation, engineering controls, administrative controls, and PPE as the last resort.
Q4: A risk matrix typically assesses risk based on which two factors?
- A. Cost and time
- B. Temperature and humidity
- C. Likelihood and consequence (severity) β
- D. Number of workers and site size
A risk matrix evaluates risk by considering the likelihood (probability) of an event occurring and the consequence (severity) of the resulting harm.
Q5: What is a risk assessment?
- A. A financial audit of the project
- B. The process of evaluating the likelihood and severity of harm from identified hazards β
- C. A building inspection certificate
- D. A type of insurance policy
A risk assessment is the process of evaluating the likelihood and severity of harm arising from identified hazards and determining appropriate control measures.
Q6: Which of these is an example of an engineering control?
- A. Installing a guardrail around an open edge β
- B. Wearing safety glasses
- C. Displaying a warning sign
- D. Rotating workers between tasks
Engineering controls physically alter the workplace to reduce risk, such as installing guardrails, ventilation systems, or machine guards.
Q7: What type of hazard is excessive noise on a construction site?
- A. Chemical hazard
- B. Psychosocial hazard
- C. Biological hazard
- D. Physical hazard β
Excessive noise is a physical hazard. Physical hazards include noise, vibration, radiation and extreme temperatures.
Q8: Which control measure is at the bottom of the hierarchy of controls?
- A. Elimination
- B. PPE (Personal Protective Equipment) β
- C. Substitution
- D. Engineering controls
PPE is the least effective control measure in the hierarchy because it does not eliminate or reduce the hazard itself and relies on correct and consistent use by the worker.
Ready to practice all 44 questions? Start the interactive quiz below.
Which document outlines specific controls for a high-risk task before it begins?
More Hazard Identification & Risk Assessment Questions
8 more worked examples with answers and explanations.
Q9: What should you do if you identify a new hazard on a construction site?
- A. Continue working and mention it at the next meeting
- B. Ignore it if no one has been hurt yet
- C. Only tell your workmates
- D. Stop work if there is immediate danger, report it to the supervisor, and document it β
Newly identified hazards should be reported immediately. If the hazard poses immediate danger, cease work in the area and report to the supervisor for assessment.
Q10: What does SWMS stand for?
- A. Site Work Management System
- B. Standard Workplace Monitoring Strategy
- C. Safe Work Method Statement β
- D. Safety Warning and Management Scheme
SWMS stands for Safe Work Method Statement. It is a document required for high-risk construction work that outlines the work, hazards, and control measures.
Q11: When is a SWMS required on a construction site?
- A. For all construction tasks
- B. Only for work over $250,000
- C. Only when requested by the client
- D. Only for high-risk construction work as defined in WHS Regulations β
A SWMS is specifically required under WHS Regulations for high-risk construction work (e.g., work at heights, confined spaces, near energised services).
Q12: What is the purpose of a toolbox talk?
- A. To distribute tools to workers
- B. To negotiate pay rates
- C. To provide a short safety briefing on specific hazards or procedures before work starts β
- D. To schedule lunch breaks
A toolbox talk is a short, informal safety meeting held on-site to discuss specific hazards, safe work procedures, or recent incidents relevant to the day's work.
Q13: Which of the following is an example of substitution in the hierarchy of controls?
- A. Providing ear plugs
- B. Using a less toxic chemical instead of a highly toxic one β
- C. Putting up a warning sign
- D. Limiting work hours near the hazard
Substitution involves replacing a hazard with something less dangerous, such as using a water-based paint instead of a solvent-based one.
Q14: What is a Job Safety Analysis (JSA)?
- A. A financial cost analysis of the project
- B. An annual safety audit by the regulator
- C. A report filed after an incident
- D. A systematic process of identifying hazards for each step of a task and determining controls β
A JSA breaks a task into individual steps and identifies hazards and control measures for each step before work begins.
Q15: Which hazard category includes asbestos and silica dust?
- A. Physical hazards
- B. Biological hazards
- C. Chemical hazards β
- D. Ergonomic hazards
Asbestos and silica dust are chemical hazards. Chemical hazards include dusts, fumes, gases, vapours, and liquids that can cause harm through inhalation, skin contact, or ingestion.
Q16: What is a "near miss"?
- A. An event that could have resulted in injury or damage but did not β
- B. A workplace injury that requires first aid
- C. A type of safety inspection
- D. A worker who narrowly passes the competency test
A near miss is an unplanned event that did not result in injury, illness, or damage but had the potential to do so. Near misses should be reported and investigated.
Key facts for this topic
- The WHS Regulations set out a hierarchy of control measures: eliminate the risk first; if that is not reasonably practicable, minimise it by substitution, isolation or engineering controls, then administrative controls, and finally personal protective equipment (model WHS Regulations, r 36). Source
- Managing risk follows four steps: identify hazards, assess risks where needed, control the risks, and review the control measures to make sure they keep working. Source
- A safe work method statement (SWMS) must be prepared before high risk construction work starts, such as work where a person could fall more than 2 metres, and the work must be done in line with it (model WHS Regulations, rr 291 and 299β300). Source
- A SWMS identifies the high risk construction work, states the hazards and risks, and describes the control measures and how they will be put in place, monitored and reviewed. Source
Common mistakes
The most common error is choosing PPE or a toolbox talk as "the best control". Exam questions almost always reward the highest control on the hierarchy that is practicable, so elimination beats substitution, which beats engineering, and so on. Also remember a SWMS is not a general risk assessment for every task: it is required for the listed categories of high risk construction work.
Keep studying
Sources and further reading (last reviewed November 2026)
WHS rules differ between states and change over time. Where this page states a legal or regulatory fact, it is based on the official sources below. If anything here disagrees with them, the official source wins. You can read how we check and correct our content.
By WhiteCard Prep Team Last reviewed: November 2026. WHS laws differ between states and territories; Victoria uses its own OHS laws. Check your state regulator for local rules.
Continue Studying
This guide is free and kept up to date by one person. β Support it