Skip to content
πŸ”Š

Noise & Vibration

Prolonged exposure to excessive noise and vibration causes permanent hearing loss and hand-arm vibration syndrome. This topic covers the noise exposure standard (85 dB(A) averaged over 8 hours, 140 dB(C) peak), audiometric testing, hearing protection selection using SLC80 ratings and classes, vibration exposure standards, engineering controls to reduce noise, and employer monitoring obligations.

31 questions | 11 easy, 16 medium, 4 hard

Study Guide: Noise & Vibration

Review these sample questions before starting the practice test.

Q1: What is the exposure standard for noise in an 8-hour workday under WHS Regulations?
  • A. 95 dB(A)
  • B. 75 dB(A)
  • C. 85 dB(A) LAeq,8h βœ“
  • D. 100 dB(A)

The WHS Regulations set the noise exposure standard at 85 dB(A) averaged over an 8-hour day (LAeq,8h). Exposure above this level requires control measures to be implemented.

Q2: What is the peak noise exposure limit under WHS Regulations?
  • A. 120 dB(C)
  • B. 100 dB(A)
  • C. 150 dB(A)
  • D. 140 dB(C) LC,peak βœ“

The peak noise exposure limit is 140 dB(C). No worker should be exposed to noise above this peak level at any time, as it can cause immediate hearing damage.

Q3: Which Australian Standard covers occupational noise management?
  • A. AS 1319
  • B. AS 2444
  • C. AS 2865
  • D. AS/NZS 1269 β€” Occupational Noise Management βœ“

AS/NZS 1269 (series) covers occupational noise management including measurement and assessment, noise control, hearing protector selection, and audiometric testing.

Q4: What is noise-induced hearing loss (NIHL)?
  • A. Temporary hearing loss from a cold
  • B. A psychological condition
  • C. Hearing loss from aging only
  • D. Permanent damage to the inner ear hair cells caused by prolonged exposure to excessive noise levels βœ“

NIHL is permanent, irreversible damage to the hair cells of the cochlea (inner ear) caused by prolonged or repeated exposure to excessive noise. It develops gradually and has no cure.

Q5: At what noise level should hearing protection be made available to workers?
  • A. 70 dB(A)
  • B. Hearing protection is never mandatory
  • C. Only above 100 dB(A)
  • D. Above 85 dB(A) β€” hearing protection must be provided and worn βœ“

When noise exposure exceeds 85 dB(A) LAeq,8h or 140 dB(C) peak and elimination or reduction is not reasonably practicable, the PCBU must provide hearing protection and ensure workers wear it.

Q6: What is audiometric testing?
  • A. A test of a worker's vision
  • B. A test of lung capacity
  • C. A test of blood pressure
  • D. A hearing test that measures a worker's ability to hear sounds at different frequencies and volumes to detect early hearing loss βœ“

Audiometric testing measures hearing sensitivity across different frequencies. Under the WHS Regulations (reg 58), the PCBU must provide audiometric testing for workers who are frequently required to wear hearing protection because of noise above the exposure standard. This means a baseline test and then periodic tests to detect hearing changes early.

Q7: How often should audiometric testing be conducted for noise-exposed workers?
  • A. Once at the start of employment only
  • B. Only after a noise complaint
  • C. Every 10 years
  • D. Within 3 months of starting noise-exposed work, then at least every 2 years βœ“

Under the WHS Regulations (reg 58), workers frequently required to wear hearing protection against noise above the exposure standard must have a baseline audiometric test within 3 months of starting that work, then further tests at least every 2 years.

Q8: What does the SLC80 rating on hearing protection mean?
  • A. The weight of the ear muff
  • B. The shelf life in months
  • C. The maximum temperature rating
  • D. The Sound Level Conversion 80th percentile β€” the noise reduction achieved by 80% of wearers in practice βœ“

SLC80 (Sound Level Conversion 80th percentile) indicates the noise reduction that 80% of wearers will achieve or exceed. A Class 5 protector (SLC80 of 26+) provides the highest attenuation.

Ready to practice all 31 questions? Start the interactive quiz below.

of 31
noise-vibrationDifficulty: ●●○

Which control is most effective for reducing noise exposure on a construction site?

More Noise & Vibration Questions

8 more worked examples with answers and explanations.

Q9: A jackhammer typically produces noise levels of approximately:
  • A. 60 dB(A)
  • B. 80 dB(A)
  • C. 100-110 dB(A) βœ“
  • D. 130 dB(A)

A jackhammer typically produces around 100-110 dB(A), well above the 85 dB(A) exposure standard. With the 3 dB exchange rate, 100 dB(A) reaches a full day's allowable noise dose in about 15 minutes, and higher levels reach it in only a few minutes without hearing protection.

Q10: Which control is most effective for reducing noise exposure on a construction site?
  • A. Issuing earplugs
  • B. Reducing work hours
  • C. Posting warning signs
  • D. Eliminating or substituting the noise source (e.g., using electric saws instead of pneumatic tools) βœ“

Following the hierarchy of controls, elimination or substitution is most effective. For example, using quieter equipment, electric instead of diesel, or pre-fabrication to reduce on-site noise-generating work.

Q11: What is Hand-Arm Vibration (HAV)?
  • A. A type of noise exposure
  • B. A type of manual handling technique
  • C. A hand signal for crane operations
  • D. Vibration transmitted from power tools and equipment through the hands and arms, which can cause vascular, neurological, and musculoskeletal damage βœ“

HAV is vibration transmitted to the hands and arms from vibrating tools like jackhammers, grinders, and chainsaws. Prolonged exposure can cause Hand-Arm Vibration Syndrome (HAVS) or "vibration white finger."

Q12: What are the symptoms of Hand-Arm Vibration Syndrome (HAVS)?
  • A. Only sore muscles
  • B. Vision problems
  • C. Hearing loss
  • D. Tingling, numbness, white fingers (blanching), loss of grip strength, and pain in the hands and fingers βœ“

HAVS symptoms include tingling, numbness, blanching (white fingers), loss of grip strength, pain, and impaired dexterity. Symptoms are often triggered by cold and can become permanent.

Q13: What is Whole-Body Vibration (WBV)?
  • A. Vibration from hand tools
  • B. A massage technique
  • C. A type of exercise
  • D. Vibration transmitted through a seat or standing platform to the whole body, e.g., from driving a bulldozer or standing on a vibrating floor βœ“

WBV is vibration transmitted to the whole body through a seat or floor, typically from vehicles and heavy plant. Prolonged exposure can cause lower back pain, spinal degeneration, and circulatory disorders.

Q14: What is the "3 dB exchange rate" in noise exposure?
  • A. For every 3 dB increase in noise level, the allowable exposure time is halved βœ“
  • B. Noise drops by 3 dB every 3 metres
  • C. You can be exposed to 3 dB extra for free
  • D. It is the minimum hearing threshold

The 3 dB exchange rate means that for every 3 dB increase in noise level, the allowable exposure time halves. At 88 dB(A), the limit is 4 hours; at 91 dB(A), only 2 hours; at 94 dB(A), 1 hour.

Q15: How should workers reduce exposure to hand-arm vibration?
  • A. Grip the tool harder
  • B. Ignore it β€” vibration is not a health hazard
  • C. Only work in warm weather
  • D. Use vibration-damped tools, limit exposure time, take regular breaks, use anti-vibration gloves, and maintain tools properly βœ“

HAV controls include using vibration-reduced tools, limiting daily exposure time, rotating tasks, taking warm-up breaks, using anti-vibration gloves, maintaining tools in good condition, and health surveillance.

Q16: A noise assessment finds that a work area consistently exceeds 85 dB(A). What must the PCBU do?
  • A. Nothing if workers do not complain
  • B. Increase workers' pay as compensation
  • C. Move the work to a different day
  • D. Implement noise controls following the hierarchy, provide hearing protection, mark the area as a hearing protection zone, and arrange audiometric testing βœ“

When noise exceeds the exposure standard, the PCBU must apply controls in order of the hierarchy (eliminate, substitute, isolate, engineer, then administrative controls) and provide hearing protection for any remaining risk. Workers frequently required to wear hearing protection must have audiometric testing. The Code of Practice also recommends signposting hearing protection areas.

Key facts for this topic

  • The exposure standard for noise is an eight-hour equivalent continuous A-weighted level of 85 dB(A) or a C-weighted peak level of 140 dB(C) (model WHS Regulations, r 56). Source
  • Workers who are frequently required to wear hearing protection to protect them from noise above the exposure standard must be given audiometric testing within 3 months of starting that work and at least every 2 years after that (r 58). Source
  • Hearing loss from noise is permanent. Controls follow the hierarchy: quieter equipment and processes, isolating or enclosing noise sources, and limiting exposure time, with hearing protection as the last resort. Source

Common mistakes

Students forget that decibels are logarithmic: an increase of about 3 dB roughly doubles the sound energy, so a short time near very loud plant can use up a whole day's safe exposure. Another trap is assuming hearing protection is enough on its own. It only works if it fits, is worn the whole time and suits the noise level.

Keep studying

Sources and further reading (last reviewed November 2026)

WHS rules differ between states and change over time. Where this page states a legal or regulatory fact, it is based on the official sources below. If anything here disagrees with them, the official source wins. You can read how we check and correct our content.

By WhiteCard Prep Team Last reviewed: November 2026. WHS laws differ between states and territories; Victoria uses its own OHS laws. Check your state regulator for local rules.

Continue Studying

This guide is free and kept up to date by one person. β˜• Support it