Manual Handling
Musculoskeletal injuries from manual handling and body stressing are among the most common serious workplace injuries in Australia. This section covers correct lifting techniques, team lifting procedures, mechanical aids (trolleys, hoists, forklifts), hazardous manual task risk factors (repetition, sustained postures, high force), and ergonomic principles for construction work.
Study Guide: Manual Handling
Review these sample questions before starting the practice test.
Q1: What is manual handling?
- A. Any activity requiring a person to use physical force to lift, push, pull, carry, or hold an object or person β
- B. Using a manual (handbook) on site
- C. Only lifting heavy objects
- D. Operating hand tools
Manual handling includes any activity involving physical force to lift, lower, push, pull, carry, move, hold, or restrain something, including repetitive tasks and sustained postures.
Q2: What is the recommended maximum weight for one person to lift?
- A. There is no fixed limit β assess each task based on risk factors β
- B. 50 kg
- C. 100 kg
- D. 10 kg
There is no single fixed weight limit. The safe lifting capacity depends on multiple factors including the load, posture, frequency, distance, grip, and individual capability.
Q3: What is the correct lifting technique?
- A. Bend your back and keep legs straight
- B. It does not matter as long as the load is light
- C. Lift quickly with a jerking motion
- D. Bend your knees, keep back straight, hold load close to body, avoid twisting β
Correct lifting technique involves bending the knees, keeping the back straight, holding the load close to the body, using leg muscles, and avoiding twisting movements.
Q4: What risk factors increase the chance of manual handling injuries?
- A. Working outdoors
- B. Repetitive movements, awkward postures, heavy loads, vibration, and sustained force β
- C. Working alone
- D. Using new tools
Key risk factors for manual handling injuries include repetitive movements, awkward or sustained postures, heavy or bulky loads, vibration, rapid or sudden force, and poor environmental conditions.
Q5: What type of injury is most commonly associated with poor manual handling?
- A. Musculoskeletal disorders (MSDs) such as back injuries, strains, and sprains β
- B. Hearing loss
- C. Chemical burns
- D. Sunburn
Musculoskeletal disorders (MSDs) are the most common injuries from poor manual handling, particularly lower back injuries, shoulder strains, and repetitive strain injuries.
Q6: Before lifting a load, what should you assess?
- A. The colour of the load
- B. Only whether you feel strong enough
- C. The weight, size, shape, grip, distance to carry, and whether mechanical aids are available β
- D. Nothing β just lift it
Before lifting, assess the weight, size, shape, grip points, carrying distance, pathway obstacles, and whether mechanical aids (trolleys, forklifts) could be used instead.
Q7: What is a mechanical aid in the context of manual handling?
- A. A first aid kit
- B. A construction helmet
- C. A safety sign
- D. Equipment such as trolleys, forklifts, hoists, or conveyors that reduce physical effort β
Mechanical aids include trolleys, hand trucks, forklifts, hoists, conveyors, and pallet jacks β equipment that reduces or eliminates the need for manual lifting.
Q8: When team lifting, what is the most important factor?
- A. All team members wearing the same colour hi-vis
- B. Clear communication, coordinated movements, and a designated leader to call the lift β
- C. Having at least 10 people
- D. The strongest person lifts the heaviest end
Team lifting requires clear communication with a designated person to coordinate the lift (calling "lift on three"), and all members must move together in a coordinated manner.
Ready to practice all 43 questions? Start the interactive quiz below.
What is the "power zone" or "strike zone" for lifting?
More Manual Handling Questions
8 more worked examples with answers and explanations.
Q9: What should you do if a load is too heavy to lift safely alone?
- A. Try anyway and hope for the best
- B. Ask the client to make it lighter
- C. Leave it where it is forever
- D. Use a mechanical aid or get help from another worker β never attempt to lift beyond your safe capacity β
Never attempt to lift a load beyond your safe capacity. Use a mechanical aid (trolley, hoist, forklift) or organise a team lift with proper coordination.
Q10: Repetitive manual tasks can cause which condition?
- A. Colour blindness
- B. Hearing loss
- C. Repetitive Strain Injury (RSI) or overuse injuries β
- D. Allergic reactions
Repetitive manual tasks can cause Repetitive Strain Injury (RSI) and overuse injuries, including tendinitis, carpal tunnel syndrome, and tenosynovitis.
Q11: What is the purpose of job rotation in managing manual handling risks?
- A. To reduce exposure to repetitive or physically demanding tasks by varying the work β
- B. To confuse workers
- C. To save time
- D. To fill in for absent workers
Job rotation reduces the duration of exposure to any single repetitive or physically demanding task, allowing different muscle groups to rest and recover.
Q12: What ergonomic principle should be considered when setting up a workstation?
- A. Aesthetics only
- B. Making it look tidy
- C. Cost minimisation
- D. Adjusting the work height, reach distance, and layout to minimise awkward postures and strain β
Ergonomic workstation design involves adjusting work height, reach distances, and layout to reduce awkward postures, minimise strain, and accommodate the physical capabilities of workers.
Q13: How can the risk of back injury be reduced when carrying loads on a construction site?
- A. Walk as fast as possible
- B. Carry the load on one shoulder
- C. Keep the load close to your body, maintain good posture, plan your route, and avoid twisting β
- D. Drag the load along the ground
Reduce back injury risk by holding loads close to the body, maintaining a neutral spine, planning a clear route, avoiding twisting, and using team lifts or mechanical aids for heavy loads.
Q14: What is the "power zone" or "strike zone" for lifting?
- A. Above head height
- B. Between mid-thigh and mid-chest β the area where lifting is safest and most efficient β
- C. Below knee height
- D. Behind the body
The power zone (between mid-thigh and mid-chest) is the safest and most efficient lifting range. Lifting outside this zone increases strain and injury risk.
Q15: Which of these tasks on a construction site involves manual handling?
- A. Reading blueprints
- B. Driving to the site
- C. Attending a safety meeting
- D. Carrying bags of cement, pushing wheelbarrows, and shovelling β
Carrying cement bags, pushing wheelbarrows, shovelling, stacking materials, and similar physical tasks all involve manual handling and associated injury risks.
Q16: What should workers report regarding manual handling concerns?
- A. Nothing β manual handling discomfort is normal
- B. Any pain, discomfort, or difficulty with tasks, and any improvements they can suggest β
- C. Only serious injuries requiring hospital
- D. Only concerns about heavy loads
Workers should report any pain, discomfort, or difficulty with manual handling tasks early, before injuries develop. They should also suggest improvements they have identified.
Key facts for this topic
- A hazardous manual task involves lifting, lowering, pushing, pulling, carrying, holding or restraining and includes repetitive or sustained force, high or sudden force, repetitive movement, sustained or awkward posture, or exposure to vibration (model WHS Regulations, r 5). Source
- A PCBU must manage the risk of musculoskeletal disorders from hazardous manual tasks, applying the hierarchy of controls (r 60). Source
- The model Code of Practice on hazardous manual tasks recommends changing the task, the workplace layout or the load, or using mechanical aids, ahead of relying on lifting technique training alone. Source
Common mistakes
Many students believe "lift with your legs" training is the main control. Training is an administrative control. Questions usually reward redesigning the task: using a trolley, hoist or forklift, reducing load weight, or storing heavy items at waist height. Also remember that sustained awkward postures and repetition are risk factors even when the load is light.
Keep studying
Sources and further reading (last reviewed November 2026)
WHS rules differ between states and change over time. Where this page states a legal or regulatory fact, it is based on the official sources below. If anything here disagrees with them, the official source wins. You can read how we check and correct our content.
By WhiteCard Prep Team Last reviewed: November 2026. WHS laws differ between states and territories; Victoria uses its own OHS laws. Check your state regulator for local rules.
Continue Studying
This guide is free and kept up to date by one person. β Support it