ποΈ TAS at a glance
Regulator: WorkSafe Tasmania
Who issues the card: WorkSafe Tasmania processes your application, which you lodge at a Service Tasmania outlet.
Safety law: Work Health and Safety Act 2012 (Tas) and the Tasmanian Work Health and Safety Regulations
Unit of competency: CPCWHS1001 Prepare to work safely in the construction industry (supersedes CPCCWHS1001)
Capital: Hobart
Online delivery: Not stated by the regulator (check with your RTO)
WorkSafe Tasmania says White Card training must be delivered by a registered training organisation and completed in Tasmania. It does not say whether online delivery is allowed, so ask the RTO how the course is delivered and confirm it has CPCWHS1001 on its scope for delivery in Tasmania.
How the White Card works in Tasmania
In Tasmania you need a construction induction card (White Card) to work in the construction industry at any level. That includes principal contractors, project managers, builders, employers, sub-contractors, employees and labour-hire workers. The only way to get one is to complete construction induction training and lodge an application at Service Tasmania.
Training must be delivered by an RTO and completed in Tasmania. You have 60 days from your training date to apply. After that you need a written declaration from the RTO confirming you passed. Service Tasmania checks your documents and sends them to WorkSafe Tasmania for processing. If your card has not arrived within 60 days of lodging, WorkSafe Tasmania asks you to call them.
Accompanied visitors, and people briefly on site to deliver equipment or supplies where a risk assessment shows the risks can be controlled in other ways, do not need a White Card. Each RTO sets its own course fee. The application fee is shown on the form.
White Card Requirements in Tasmania
Complete CPCWHS1001 in Tasmania with an RTO that has the unit on its scope for delivery in Tasmania. You are responsible for checking this on training.gov.au
Get a statement of attainment showing your name, the RTO number, the date of issue and the unit code CPCWHS1001
Lodge the Construction Induction Application Form, your statement of attainment and evidence of identity at a Service Tasmania outlet within 60 days, and pay the fee shown on the form
Have a Unique Student Identifier (USI), which is needed for all nationally recognised training
Keep your construction induction card available for inspection
What WorkSafe Tasmania does
WorkSafe Tasmania is Tasmania's work health and safety regulator under the Work Health and Safety Act 2012. For White Cards, it processes card applications lodged through Service Tasmania, replaces Tasmanian-issued cards, and publishes guidance on which interstate cards are recognised in Tasmania.
The 2-year rule in TAS
Tasmania uses the model rule: a business (PCBU) must not direct or allow a worker to carry out construction work unless the worker has completed general construction induction training. If the worker trained more than 2 years ago, they must also have done construction work in the past 2 years.
A White Card is general induction only. Every site still needs its own site-specific induction, and some tasks need a separate high risk work licence.
Replacing a lost or damaged card
Lodge the Construction Induction Replacement Application Form, your card number and evidence of identity at a Service Tasmania outlet, and pay the fee. Only cards originally issued in Tasmania can be replaced there. Cards from other states must be replaced by the state that issued them. WorkSafe Tasmania suggests photographing or writing down your card number.
How to Get Your White Card in TAS
Step 1: Prepare
Study for the assessment using our free practice test with 505+ questions. Focus on WHS legislation, hazard identification, safety signs, PPE and emergency procedures. Our study guide and glossary cover the key terms.
Step 2: Enrol with an RTO
Choose a registered training organisation (RTO) that can deliver CPCWHS1001 in TAS. The regulator does not state which delivery modes are allowed, so confirm with the RTO before you enrol. Course prices are set by each RTO, so compare a few before you book.
Step 3: Complete Training
Attend the course and pass the assessment. Have your Unique Student Identifier (USI) ready and bring the identity documents your RTO asks for. Under the national unit, assessment must use a range of methods, including practical demonstration and oral and written reporting.
Step 4: Receive Your Card
Who issues it: WorkSafe Tasmania processes your application, which you lodge at a Service Tasmania outlet. Keep your statement of attainment (or statement of training) safe, as you may need it on site while you wait and to replace a lost card later.
What the course covers and what to expect
The content is set by the national unit CPCWHS1001, so it is the same in every state. According to the unit's published knowledge evidence, you need to show you understand:
- Basic duty of care, and the roles, rights and responsibilities of businesses and workers under the WHS (or OHS) law that applies where you are
- The meaning of "hazard" and "risk", and the five risk management steps in order: identify the hazard, assess the risk, consult and report, control the hazard, review
- Common construction hazards, including asbestos, confined spaces, electricity and power lines, excavations and underground services, dust, falling objects, hazardous substances, heat and cold, manual handling, noise, plant and mobile plant, unplanned collapse, UV radiation, and working at heights including scaffolding
- Construction safety signs and tags: emergency information, fire, hazard (danger and warning), regulatory (prohibition, mandatory, limitation) signs, and danger and out-of-service tags
- The purpose of job safety analyses (JSAs), safe work method statements (SWMS) and safety data sheets (SDS)
- The roles of first aid officers, health and safety representatives, WHS committee members and supervisors
- Responding to incidents and emergencies, accessing first aid, and the types and uses of fire blankets, fire extinguishers (water, CO2, powder, foam), hose reels and mains
On the day, expect to identify and orally report two construction hazards and explain how to control them. You will also explain the meaning of safety signs and correctly fit eye protection, hearing protection, a hard hat and a high-visibility vest, shirt or jacket. The assessor must watch these tasks in person or through live audio and video. Practise with our flashcards and WHS legislation questions.
Prepare for Your TAS White Card
Practice with 505+ realistic questions covering all 12 topics. Free, no sign-up required.
Start Free Practice TestTasmania White Card FAQ
How do I get a White Card in Tasmania?
Complete CPCWHS1001 in Tasmania with an RTO. Then, within 60 days, lodge the application form, your statement of attainment and evidence of identity at a Service Tasmania outlet. WorkSafe Tasmania processes the application.
How much does a White Card cost in Tasmania?
Each RTO sets its own course fee. There is also an application fee, shown on WorkSafe Tasmania's Construction Induction Application Form.
Can I use my mainland White Card in Tasmania?
Yes, if it is current and valid. WorkSafe Tasmania recognises all cards issued after completing CPCWHS1001, and lists which older interstate cards are accepted. Examples are NSW cards issued after 31 March 2004, and Victorian white cards issued after 1 July 2008.
Does a White Card expire?
The card has no expiry date. However, under the WHS Regulations a business must not let you do construction work if you trained more than 2 years ago and have not done construction work in the past 2 years. In that case you need to retrain.
White Card in Other States
Compare every jurisdiction side by side in our White Card requirements by state guide.
Sources and further reading (last reviewed November 2026)
WHS rules differ between states and change over time. Where this page states a legal or regulatory fact, it is based on the official sources below. If anything here disagrees with them, the official source wins. You can read how we check and correct our content.