Skip to content

AS 1319 Safety Signs Guide

By WhiteCard Prep Team | Last updated: November 2026 | Reading time: 10 min

Safety signs are your silent safety supervisors on construction sites. Australian Standard AS 1319-1994 (Safety signs for the occupational environment) sets out how safety signs are designed and used in workplaces. This guide covers what you need to know about safety signs for your White Card (CPCWHS1001) assessment.

Practice safety sign questions

Our Safety Signs topic has 43 practice questions with detailed explanations.

Why Safety Signs Matter

Safety signs communicate critical safety information quickly, and pictograms help get the message across even where workers speak different languages. On construction sites, standardised signs provide a shared safety language. Safety signs are also part of the White Card unit itself: CPCWHS1001 requires you to identify and explain the meaning of safety signs and symbols (performance criterion 3.3).

Under WHS laws, the person conducting a business or undertaking (PCBU) must manage risks, and signs are one of the administrative controls used to warn and instruct people. Some WHS regulations also require specific signs or placards in particular situations, such as asbestos work areas or hazardous chemical storage. Signs never replace higher-order controls such as eliminating or isolating a hazard, but missing or incorrect signs can leave workers unaware of hazards, increasing the risk of injury or death.

How AS 1319 Groups Safety Signs

The CPCWHS1001 knowledge evidence lists the sign groups you need to know, which follow the AS 1319 structure:

  • Regulatory signs: prohibition, mandatory, and limitation or restriction
  • Hazard signs: danger and warning
  • Emergency information signs: exits, emergency equipment and first aid
  • Fire signs: location of fire alarms and firefighting equipment
  • Safety and lockout tags: danger tags and out-of-service tags

For the test, most people start with the four most common visual types below: prohibition, mandatory, warning and emergency information signs.

The Four Main Sign Types You Will See

1. Prohibition Signs β€” Red Circle with Diagonal Bar

Prohibition signs tell you what you must NOT do. They feature a red circle with a red diagonal bar (slash) across a black symbol on a white background. The red colour and bold design command immediate attention.

Colour: Red circle and diagonal bar on white background with black symbol

Shape: Circular

Meaning: "DO NOT" β€” an action that is forbidden

Common Examples:

  • No Smoking
  • No Entry
  • No Unauthorised Access
  • No Mobile Phones
  • No Naked Flames
  • Do Not Operate

2. Mandatory Signs β€” Blue Circle

Mandatory signs tell you what you MUST do. They feature a white symbol on a blue circular background. These signs instruct workers to take specific safety actions.

Colour: White symbol on blue background

Shape: Circular

Meaning: "YOU MUST" β€” a required action

Common Examples:

  • Hard Hat Must Be Worn
  • Safety Boots Must Be Worn
  • Hi-Vis Clothing Must Be Worn
  • Eye Protection Must Be Worn
  • Hearing Protection Must Be Worn
  • Safety Harness Must Be Worn

3. Warning Signs β€” Yellow Triangle

Warning signs alert you to potential hazards or dangerous conditions. They feature a black symbol inside a yellow equilateral triangle with a black border. These signs do not tell you what to do β€” they warn you to be alert.

Colour: Black symbol on yellow background

Shape: Triangular (equilateral)

Meaning: "WARNING" β€” be aware of a hazard

Common Examples:

  • Electrical Hazard (lightning bolt)
  • Slippery Surface
  • Trip Hazard
  • Overhead Hazard (falling objects)
  • Chemical Hazard
  • Radiation Hazard
  • Moving Machinery

4. Emergency Information Signs β€” Green Rectangle

Emergency information signs indicate the location of emergency facilities, exits, and first aid equipment. They feature white symbols and text on a green background. These signs are critical during emergencies when workers need to find exits, first aid, or emergency equipment quickly.

Colour: White symbol/text on green background

Shape: Rectangular

Meaning: "SAFE CONDITION" β€” emergency routes, first aid, and safety equipment

Common Examples:

  • Emergency Exit (running figure with arrow)
  • First Aid Kit Location
  • Emergency Assembly Point
  • Emergency Shower
  • Eye Wash Station

Additional Sign Types

Fire Signs β€” Red with White

Fire signs identify the location of fire alarms and firefighting equipment. They feature white text or symbols on a red background. Fire signs are one of the sign groups covered by AS 1319 and listed in the CPCWHS1001 knowledge evidence. The selection and location of the portable extinguishers and fire blankets themselves is covered by a separate standard, AS 2444 (Portable fire extinguishers and fire blankets β€” Selection and location).

  • Fire Extinguisher Location
  • Fire Hose Reel
  • Fire Alarm Call Point
  • Fire Blanket

Danger Signs and Limitation or Restriction Signs

In addition to the four common types, AS 1319 includes Danger signs (red, white and black, with the word DANGER) for hazards that are likely to be life-threatening, and limitation or restriction signs, which are regulatory signs that set a limit, such as a maximum speed, rather than banning an activity outright. Danger signs convey a higher level of urgency than warning signs.

Safety Tags and Lockout Tags

The White Card unit also expects you to recognise safety and lockout tags. A danger tag is attached to isolation points or equipment to show that it must not be operated because someone may be working on it or it is unsafe. An out-of-service tag shows that equipment is faulty or not to be used until it has been repaired or checked. Never remove a tag that you did not attach; report the issue to your supervisor instead.

Barricade Tape

Barricade tape is commonly used on construction sites to mark off hazard areas. Colour use is a site practice rather than something set out in AS 1319, so always follow your site induction, but a common convention is:

  • Red and white striped tape: Danger β€” do not enter without authorisation
  • Yellow and black striped tape: Caution β€” hazard present, proceed carefully

GHS Chemical Labels

The Globally Harmonized System of Classification and Labelling of Chemicals (GHS) provides standardised chemical labelling, and Australia adopted it under WHS laws. GHS labels use red-bordered, diamond-shaped pictograms. There are nine GHS pictograms:

  • Flame: Flammable substance
  • Skull and crossbones: Acute toxicity (fatal or toxic)
  • Corrosion: Corrosive to skin/metals
  • Exclamation mark: Irritant, skin sensitiser, harmful
  • Health hazard (person with star): Carcinogen, mutagen, reproductive or organ toxicity
  • Flame over circle: Oxidiser
  • Gas cylinder: Gas under pressure
  • Exploding bomb: Explosive
  • Environment (dead fish and tree): Environmental hazard β€” note that the environmental hazard classes have not been adopted under Australian WHS laws, so you may or may not see this pictogram on workplace labels

Safety Sign Placement Rules

Good practice for placing and maintaining safety signs is that they are:

  • Placed at the point of hazard and at entry points where workers need to take action
  • Clearly visible and not obscured by other materials
  • Well-lit or luminescent in low-light conditions
  • Positioned at eye level where practicable
  • Maintained in good condition and replaced when faded or damaged
  • Removed when the hazard no longer exists (to prevent "sign fatigue")

Quick Reference: Sign Colour Memory Trick

Use this simple memory aid for the White Card test:

  • RED = STOP/DON'T β€” Prohibition (like a stop sign)
  • BLUE = DO β€” Mandatory (things you MUST do)
  • YELLOW = WATCH OUT β€” Warning (like traffic lights)
  • GREEN = GO/SAFE β€” Emergency info (safe direction, first aid)

White Card Test Questions on Safety Signs

There is no single national White Card exam. Each Registered Training Organisation (RTO) writes its own assessment, so the number of sign questions varies. What is fixed is that the unit requires you to identify and orally explain the meaning of required safety signs and symbols. Common question types include:

  • "What colour and shape is a [type] sign?" β€” Know the four common types by colour and shape
  • "A worker sees a [colour] sign with a [symbol]. What does it mean?" β€” Apply your knowledge of categories
  • "Where should safety signs be placed?" β€” At the point of hazard and entry points
  • "What does a danger tag or out-of-service tag mean?" β€” Know the difference between the two tags
  • "What does the GHS [pictogram] indicate?" β€” Know the nine GHS pictograms

Practice Safety Signs Questions

Test your knowledge with 505+ White Card practice questions.

Start Free Practice Test

Sources and further reading (last reviewed November 2026)

WHS rules differ between states and change over time. Where this page states a legal or regulatory fact, it is based on the official sources below. If anything here disagrees with them, the official source wins. You can read how we check and correct our content.

This guide is free and kept up to date by one person. β˜• Support it